Kanger Protank 3 V2 | Protank Kanger 3 | Kanger Clearomizers
Click To Enlarge

Kanger Protank 3 V2

Price: $28.99
Sale Price: $15.99
  • Shipping info: Usually Ships in 24 Hours
  • Product images are for illustration purposes only:
  • Item #: prot3v2
  • Condition: New
* Marked fields are required.
Availability: In-Stock
Qty: *

Kanger Protank 3 V2 Clearomizers

The new Kanger Protank 3 v2 is an updated version of Kanger Protank 3. This dual coil clearomizer still has the durable pyrex glass tank and stainless steel body as its original counterpart with a wonderful new upgrade. Kanger has redone their coil heads, enclosing the wicks inside the atomizer. This helps to prevent leaking.

The Kanger Protank 3 v2 is 510 threaded and will fit on any eGo battery, though just like its predecessor, it should be used with larger batteries to ensure you get the most out of this powerful clearomizer. The coil heads are interchangeable with the Protank 1 and EVOD. You are also able to replace the drip tip if you'd prefer. In case you need to clean it or perform any maintenance, the V2 is glue free. This means it can be completely disassembled and reassembled. Kanger has taken a great product and made it even better.

PACKAGE CONTENTS:

  1. 1 - ProTank 3 v2
  2. 2 - Coils Heads
  3. 1 - Beauty Ring

HOW TO CHANGE THE COIL:

  1. Turn the tank upside down and unscrew the base assembly cap from the bottom of the tank.
  2. Thread on a new coil ( do not over tighten the coil into the base, a snug fit is all you need)
  3. Reinstall the base assembly into the tank.

HOW TO FILL/REFILL:

  1. Turn the Kanger Protank 3 upside down and unscrew the base assembly cap from the bottom of the tank.
  2. Fill with approximately 2.0ml-2.4ml of e-liquid by tilting the Kanger Pro tank at a slight angle and dripping juice down the inside wall against the outer wall of tank.
  3. Screw the top cap assembly back onto the tube.
  4. Screw onto electronic cigarette device and you're ready to vape.
  5. Let the ProTank sit for a few minutes when first filling with liquid, this will allow the liquid to absorb into the coil wicks. Firing the Kanger Pro Tank with a dry coil can cause burning of the wicking material and possibly ruin the coil.

NOTES:

  • The metal tube in the center of the Protank 3 runs strait through the clearomizer, so avoid getting liquid into the tube, otherwise leaking may occur.
  • A small amount of liquid can leak from the mouthpiece when you're changing the coil (wicks) or adding liquid, since the seal is temporarily broken when the base is removed.
  • Gurgling or leaks usually happen when liquid ends up in the metal tube in the middle. To resolve this issue without emptying the tank, remove the clearomizer from the battery and blow through the mouthpiece. We recommend wrapping a tissue or paper towel around the end to catch any liquid.
  • If possible, keep the tank more than 1/3 full. This helps maintain the vacuum and will help prevent leaks.
  • The coils (wicks) have a life, on average of 10-20 days depending on the volume of vaping. When they burn out, they may cause a bit of leaking or lack of vapor. This can be remedied by simply replacing the coil.
  • The coil (wicks) can loosen when unscrewing the tank or the base. Always check the coil for tightness before vaping.

Compatible with: ProTank Replacement Coil, EMOW Clearomizer Coil Heads

Reviews (6) Write a Review
No Reviews. Write a Review